
Réf. GNC-UTP5EPVC
Caractéristiques électriques et dimensionnelles 1 – Conducteur: 24 AWG, Cuivre massif recuit 2 – Isolation: Polyoléfine 3 – Assemblage en paires à pas courts différents (4 paires) 4 – Gaine: PVC Résistance Max cc (Ω/km) @20ºC: 93.8 Capacité mutuelle nominale (nF/km)@1kHz: 56 Vitesse de propagation NVP (%): 65 Impédance moyenne (Ω):100 ± 5 @ 100MHz
Prix communiqué par notre équipe selon vos besoins
Produits complémentaires et accessoires
Sur commandeSuperior qualified standard polishing; – Superior qualified standard PC, APC, UPC, SPC polishing; – 100% optic test: Insertion Loss: ≤0.3 (PC); ≤0.2 (APC); ≤0.2 (UPC); ≤0.3 (SPC); – 100% optic test: Return Loss: ≥45 (PC); ≥60 (APC); ≥55 (UPC); ≥50 (SPC); – φ0.9mm, φ2.0mm, φ3.0mm cable optional; – Single mode (9125) or multi mode (50125 or 62.5125) fiber available;
Sur commandeProduct Description Datasheet High Quality Qsfp AOC cable length=2m Features Quad Small Form-factor Pluggable (QSFP) Maximum Aggregate Data Rate 100Gbps EDR, FDR, QDR, DDR, SDR (Infiniband) 10/25/40/100G Ethernet Bi-directional parallel link BER<1e-12 From 0 to 50 degree case temp CDR no/off automatically 10/14/25/28Gb/s per lane, x4 channels Up to 70m (OM3) Up to 100m (OM4) Low power consumption
Sur commande- Up to 1.25 Gb/s bi-directional data links - 100m transmission over unshielded - Compliant with IEEE Std 802.3TM-2002 - Compliant with SFP MSA - RoHSCompliance - Access to physical layer IC via 2-wire serial bus - RJ-45 connector - Hot Pluggable SFP footprint - +3.3V single power supply
Sur commandeUsing one single fiber core to transmit and receive simultaneously over 1310nm and 1550nm wavelengths. They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .They are RoHS compliant and lead-free. Models et Références WDM SFP, 1 brin de fibre, SM Avec fonction DDM TSS-G35-20LC 1.25G SFP SM WDM Tx1310/Rx1550 FP 20KM LC w
Sur commandeCaractéristiques électriques et dimensionnelles 1 – Conducteur: 24 AWG, Cuivre massif recuit 2 – Isolation: Polyoléfine 3 – Assemblage en paires à pas courts différents (4 paires). 4 – 24AWG Fil de continuité en cuivre étamé 5 – Ecran Aluminium Polyester 6 – Gaine: PVC Résistance Max cc (Ω/km) @20ºC: 95.0 Capacité mutuelle nominale (nF/km)@1kHz: 56 Vitesse de propagation NVP (%): 65 Impédance moye
Sur commandeCaractéristiques électriques et dimensionnelles: 1 – Conducteur: 23 AWG, Cuivre massif recuit. 2 – Isolation: Polyoléfine Foam-Skin. 3 – Assemblage en paires à pas courts différents (4 paires) avec écran Aluminium/Polyester individuels 4 – Fil de continuité en cuivre étamé 5 – Tresse collective en cuivre étamé
Sur commande1 – Conductor: 23 AWG, Solid Bare Annealed Copper. 2 – Insulation: Polyolefin. 3 – Varying short pair lay-length (4 pairs). 4 – Cross filler. 5 – Aluminium/Polyester foil. 6 – Tinned Copper drain wire. 7 – Inner Sheath: PVC material. 8 – Outer Sheath: PE material.
Sur commandeThis category 6 F-UTP cable is dedicated to every high bit rate transmissions including 10 GIGABIT ETHERNET. This cable is characterized up to 500 MHz. Solid annealed copper conductors (AWG 24) Coloured polyethylene insulation Wires twisted in pairs Overall aluminized general screen (aluminium on outer side) and tinned annealed copper drain wire.