
Réf. OC48-20/80
The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 2.488Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with S
Caractéristiques techniques
Prix communiqué par notre équipe selon vos besoins
Produits complémentaires et accessoires
Sur commandeKey Features: 1. Plug-and-play, hot pluggable 2. Extends RS232/RS422/RS485 transmission up to 2Km on MMF, 80Km on SMF 3. Industrial din-rail mounting, IP40 protection grade 4. Protects against electrical interference and chemical corrosion 5. Built-in surge and static protection 6. Diagnostic and unit indicator LEDs 7. Wide temperature range -40 ℃ – +75 ℃ 8. Dual power supply input, 9-52VDC 9. Rai
Sur commandePorte avant, en verre, avec film d’encadrement en noir Installation murale Installation facile; installation standard 10” ou 19”; Les accéssoires d’installation sont monté sur demande Entrée de câble sur les deux panneaux haut et bas Angle d’ouverture de porte avant =180° Capacité de charge:30KG Protection de protection :IP20 Matériau: Acier SPCC ; Epaisseur:profilet de montage: 1.5mm, autres: 0.8
Sur commandeTS-IF1F4-SC & TS-IF2F6-SC: Unmanaged 10/100 Mbps industrial fiber switch, operating temperature-40 ℃ to + 80 ℃ , support wide voltage dual power input, meet IP30 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stab
Sur commandeTS-4RS485-1ETH provides 4 ports RS485 (RS485 connector: RJ45), 1 port 10/100Base-Tx Ethernet (and optional: 1port fiber port (SFP or 1*9)). Its provide strong function configuration tools based in Windows platform, and can guide user configure the device step by step. All configurations are coming true by WEB or Telnet, support cross-gateway and cross-router, user can change configure IP address,
Sur commandeThe SFP transceivers are high performance, cost effective modules supporting data-rate of 155Mbps up to 120km, 200km transmission distance with SMF. The transceiver consists of three sections: a uncooled DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compa
Sur commandeTS-OC12-xx Transceiver is a high performance, cost effective module which have a Duplex LC optics interface. Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The receiver section uses a PIN receiver and the transmitter uses 1550 nm DFB laser, up to 20dB link budge ensure this module SONET OC-12/SDH STM-4 120km application. Models et Références Réf Désignation Fi
Sur commandeTS-QSFP-SR4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for InfiniBand QDR/DDR/SDR,12G/10G/8G/4G/2G fiber channel, PCIe and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 11.3Gbps operation for an aggregate data rate of 45.2Gbps 100m using OM3 fiber. These modules are designed to operate over multi
Sur commandeLe module SFP Mikrotik S-21LC10D est un émetteur-récepteur 1 Gbps singlemode compatible avec tous les équipements Mikrotik disposant d'un port SFP. Il permet des liaisons fibre optique singlemode jusqu'à 20km, idéal pour interconnecter des sites distants.