
Réf. TSM-4E1/ETH
TSM-4E1/ETH Converter is based on FPGA, providing 4 unframed E1 interfaces and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial
Caractéristiques techniques
Prix communiqué par notre équipe selon vos besoins
Produits complémentaires et accessoires
Sur commandeThe E1 to Ethernet protocol Converter is a device that extends Ethernet by means of telecommunication lines (E1 or E1 transport network, such as PDH, SDH, or microwave, etc.) and is also referred to “Net Bridge". It can effectively utilize free bandwidth of telecom operators’ lines and can be used instantly once it is deployed, with little increased investment. Power : 220V±20% , -36 ~ -72V Power
Sur commandeIt converts Ethernet frame structure to E1 frame structure, and recovers E1 frame structure to Ethernet frame structure at the other side, which enables Ethernet data to transmit in telecom network based on E1. Because it is efficiently and effectively used the spared bandwidth of telecom providers, it saves the networking cost and improve the efficiency and can be used immediately. The outstandin
Sur commandeCe model un est équipement de transport point-à-point utilisant les circuits FPGA. Il est en une seule carte avec les fonctions d’alarme complètes. Il offre 1~4 10/100M canaux Ethernet, 1~08 (FXS/FXO,2/4-fils E&M) canaux voix et 1~4 canaux de données serie en option. La format de boitier 19” en rack, avec faible volume et poids. Offre 1~4 ×2Mb/s interfaces digital. Fournit 1~4 canaux de 10M/100M,
Sur commandeTS-IF2F4 is an Industrial Ethernet Switch, which can provide economical solution for your Ethernet. Its dustproof fully sealed structure (pr protective case of IP30 level), over-current, over-voltage and EMC protected wide power input, which can work reliably in harsh and dangerous environment. It provides 4 10/100/1000Base-TX ports and 2 Gigabit SFP ports.
Sur commandeTechnical Specification: HD TVI/CVI/AHD/CVBS 4 in 1 Video to Fiber Converter can simultaneously transmit 4channels HD TVI/CVI/AHD/CVBS video over one single-mode optical fiber. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for differ
Sur commandeUtilisé pour les switchs industriels, la vidéosurveillance, …. peut supporter les rail DIN pour l'installation des équipments disjoncteurs, Switch industriels , thermostats… Possède une plaque pour fixation avec vis plusisurr entrées de cable Ventilateurs 220VAC installé
Sur commandeTechnical Specification: HD TVI/CVI/AHD/CVBS 16 in 1 Video to Fiber Converter can simultaneously transmit 16 channels HD TVI/CVI/AHD/CVBS video over one single-mode optical fiber. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for dif
Sur commandeTS-1800N cable Fault Locator is used for test break, short circuit faults of telephone cable data cable, high frequency cable, coaxial cable, and so on. TS-1800N can do auto test of various faults, and the details as follows: – DGAC( Digital gain auto control ): This will reduce the waveform distoration caused by the Potentiometer knob; and also can be used for pure line adjust which is convenient