
Réf. TSS-DAC
Copper cable high speed SFP+ Direct Attach Cable (DAC) provides high performance in 10 Gigabit Ethernet (10GbE) network applications, using an enhanced SFP+ connector to send 10Gbps data through one paired transmitters and receivers over a thin twinax cable. They are compliant with electrical standards SFF-8431, SFF-8083 and mechanical standard SFF-8432, EEPROM standard SFF-8472. Solid silver plat
Caractéristiques techniques
Prix communiqué par notre équipe selon vos besoins
Produits complémentaires et accessoires
Sur commandeTS-4RS485-1ETH provides 4 ports RS485 (RS485 connector: RJ45), 1 port 10/100Base-Tx Ethernet (and optional: 1port fiber port (SFP or 1*9)). Its provide strong function configuration tools based in Windows platform, and can guide user configure the device step by step. All configurations are coming true by WEB or Telnet, support cross-gateway and cross-router, user can change configure IP address,
Sur commandeProduct Description Overview: This series adopts industrial-grade design, large-scale FPGA design, provides 1 serial port, and each port supports RS232/422/485 three business interfaces at the same time. The device is the best choice for connecting the remote terminal unit (RTU) to the host computer (HOST) or distributed data acquisition system (SCADA) controller, with high performance-price ratio
Sur commandeKey Features: 1. Plug-and-play, hot pluggable 2. Extends RS232/RS422/RS485 transmission up to 2Km on MMF, 80Km on SMF 3. Industrial din-rail mounting, IP40 protection grade 4. Protects against electrical interference and chemical corrosion 5. Built-in surge and static protection 6. Diagnostic and unit indicator LEDs 7. Wide temperature range -40 ℃ – +75 ℃ 8. Dual power supply input, 9-52VDC 9. Rai

Câble réseau Schneider Electric Actassi (réf. VDICD62X218) de catégorie 6A à haute performance, avec blindage U/FTP et écrantage individuel de chaque paire. Conducteur cuivre nu monobrin 23 AWG et gaine LSZH pour un débit 10GBASE-T jusqu'à 10 Gbps.
Sur commandeTS-QSFP+-A2M is a QSFP+ Active Optical Cable (AOC) Assembly is designed for short distance links in high-speed interconnecting networking applications such as high-performance computing (HPC), enterprise networking including top-of-rack switching and network storage markets. It provides full duplex operation and supports distance up to 300 meters on OM3 fiber. The 40G QSFP+ AOC can be used as a re
Sur commandeSFP+ Active Optical Cable (AOC) is a 10Gbps solution to10G Ethernet, and datacenter. The integrated cable transmits 10Gbps data in each direction over MMF with distance up to 100m. The AOC is SFP+ MSA compliance, low power consumption and lightweight. Other high-throughput data transmission network 10Gb/s active optical cable up to 100m OM2 MMF 850nm VCSEL and PIN receiver Single 3.3V power supply
Sur commande- Up to 1.25 Gb/s bi-directional data links - 100m transmission over unshielded - Compliant with IEEE Std 802.3TM-2002 - Compliant with SFP MSA - RoHSCompliance - Access to physical layer IC via 2-wire serial bus - RJ-45 connector - Hot Pluggable SFP footprint - +3.3V single power supply
Sur commandeUsed on industrial switch, supporting high and very low temperatures -10c°-70c° They simultaneously comply with Gigabit Ethernet as specified in IEEE STD 802.3 and 1x Fibre Channel as defined in FC-PI-2 Rev. 10.0 .They are RoHS compliant and lead-free. Models: SFP industriel (supporte les temperatures –10c°-70c°) avec fonction DDM Réf Désignation Fiche Technique TS-G88-05IND 1,25G SFP MM 850nm VCS