Câbles, jarretières, ODF, modules SFP, convertisseurs, GPON/FTTH et outils de raccordement et de mesure fibre.
Catégorie
Disponibilité
Marque (1)
Réseau
Nombre de ports
Débit
Type de fibre
Portée fibre
Connecteur
Vidéo
Nombre de canaux
Caractéristiques
Hauteur (U rack)
27 produits
27 produits
Sur commandeProduit sur Commande Overview: DATASHEET (PDF) This device provides 32Channel telephone 1-4Channel E1 interface, 4Channel 1000M Ethernet interface (Wire speed 1000M) and 4 expansion interface. 4Channel Ethernet interface is switch interface, can support VLAN. Option: 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, it is very flexible.
Sur commandeE xtreme high compact and powerful MSTP equipment, it integrates all kind of transportplatforms, such as IP Ethernet, SDH, PDH, DDN, PCM all together; supports all type of digital services, such as digital cross connect (DXC), IPPBX,voice/data drop/insert services all-in-one on a 3.5U height, 19 inches width equipment shelf. By the advanced state-of-art modular design, TSM-60-3516 has the 10Gbps b
Sur commandeSM-30EN transmet 30 lignes telephoniques analogiques, 4 canaux Fast Ethernet et 4 canux E1 sur une paire de fibre optique ( oubien une seule fibre, selon la demande). Avec tous les modules FXO/FXS soudés sur la carte mère,, ce modèle est plus stable en performance que le model en chassi modulaire avec des cartes. De plus, les port E1 peuvent fournir jusqu’à 120 lignes 64 kbps voix/données de trans
Sur commandeCe model un est équipement de transport point-à-point utilisant les circuits FPGA. Il est en une seule carte avec les fonctions d’alarme complètes. Il offre 1~4 10/100M canaux Ethernet, 1~08 (FXS/FXO,2/4-fils E&M) canaux voix et 1~4 canaux de données serie en option. La format de boitier 19” en rack, avec faible volume et poids. Offre 1~4 ×2Mb/s interfaces digital. Fournit 1~4 canaux de 10M/100M,
Sur commandeProvides 1-4*E1 interface, 1-4*10M/100M Ethernet interface (Wire Speed 100M) . 4* Ethernet interface is switch interface, can support VLAN. It is very flexible. It has alarm function. The work is reliable, stable, and low power consumption, high integration, small size.
Sur commandeModel: TSM-4PCM: 4*POTS+ 1 *FE SFP single Fiber Mux (Desktop Type) The Equipment supports 1-4*100M Ethernet +4*Voice in the same core Optical fiber transmission is widely used in a variety of industrial control card instrumentation and other occasions not only save fiber resources but also save fiber equipment reduce the point of failure to facilitate the maintenance of equipment. 1-4*100M Etherne
Sur commandeTechnical Specification: HD TVI/CVI/AHD/CVBS 8 in 1 Video to Fiber Converter can simultaneously transmit 8 channels HD TVI/CVI/AHD/CVBS video over one single-mode optical fiber. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for diffe
Sur commande1. Display relative optical power. 2. Identify the propagation direction of light. 3. Equipped with visual fault locator function. 4. Test sensitivity -40dBm to 10dBm. 5. LED display, 4 fixtures support bare fiber, 0.9mm, 2mm, 3mm fiber. 6. sound alarm reminder, Low power reminder. 7. Comes with a hood to provide more accurate test results outdoors. 8. Recognize the signal of 270Hz, 1KHZ,2KHz.
Sur commandeOutput Optical Power >30mW Support Optical Fiber Interfaces – FC – SC – ST – LC Output Wavelength 650nm±10nm Fiber Optic adapter 2.5mm universal connector Service temperature 0~+60°C Storage Temperature -20~+70°C Battery Type 2 No.5 alkaline batteries Battery Life >9 hour Shape 17.5x2x2cm Weight 70g
Sur commandeProduct Description TS-1FOUTLET One port fiber poutlet, wall mount. To be used with drop cable input ,without adapter and pigtails
Sur commandeTS-FTB 24P NAP is a fiber optic terminal box that suitable for optical fiber splicing, distribution and protection. It is reasonable design for fiber arrangement, and for outdoor wall mounted and pole mounted application. Telecommunication Networks Data communications Networks Material: ABS plastic 4pcs fiber optic splice trays, each 12 fibers; max. 48 fibers Can load 24pcs SC simplex adapter
Sur commandeAplicable in FTTH Project Suitable for corridor, basement, room and building's outer walls application With the function of mechanical splice, fusion splice, light splitting, wiring distributions – Industry Standard User Interface, be made of high impact plastic. – Can accommodate 1×8 & 1X16 PLC splitter. – Anti-UV, Ultra violet resistant and rainfall resistant.
Sur commandeTS-FVM5 est un microscope vidéo portable utilisé pour inspecter toutes sortes de terminaisons de fibre optique, en particulier pour les femelles. Il élimine la nécessité d'accéder à l'arrière des panneaux de raccordement ou de démonter les périphériques matériels avant l'inspection.
Sur commandeUsage exterieur murale, pylone ou aérien. Struture en PE resistant aux intempéries et au soleil. Température de -40c° à +65c° _ Ts-gj02vm-optic_fiber_closure: PDF _ User_manual_for_ts-gpj02vm_optic_fiber_closures: PDF
Sur commandeMade of high quality stainless steel screws and accessories; Silica rubber seal, with excellent sealing performance and easy installation Adequate splice space with bending radius>40mm No special training is needed. Easy install and reopen The closure is made of high qualified plastic with aging-resistant and anti-UV materials. Good quality and long service life With various cable fixing rings, fi
Sur commandeModels and references TS-MC3110SM/MM 10/100/1000Mbps adaptive Gigabit Ethernet media converter adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 1000Base-SX, inter-converting electrical signals of 10Base-T/100Base-TX/
Sur commandeTS-MC410SM / TS-MC810SM are 10/100/1000Mbps adaptive Gigabit Ethernet media converters adopts switching technology to fulfill media conversion. It complies with IEEE802.3, IEEE802.3u, IEEE802.3z and IEEE802.3ab standards. Presently it supports two types of media network connections: 10Base-T/100Base-TX/1000Base-T, and 1000Base-SX, inter-converting electrical signals of 10Base-T/100Base-TX/1000Base
Sur commandeThe HDMI Fiber optic extender provides extension of HDMI, bidirectional audio and RS232 over one fiber optic cable, it supports HDMI1.4 and MHL2.1 dual mode, it is fully compatible with MHL2.1, HDMI 1.4b, HDMI 1.4b 3D and HDCP 1.4, high resolution up to 1920*1200@60Hz. The extender can use for a wide range of applications requiring long distance transmission of high resolution with high quality by
Sur commandeCommercial-grade HDMI extender over fiber is used to extend the transmission of HDMI audio and video signals, are usually used in the HDMI cable limit length cannot meet the transmission distance.This product transmits HDMI audio and video signal to 20KM user through the fiber, up to 120KM, equipment supports TCP/IP network protocol, can realize one transmitter to multiple receiver transmission th
Sur commandeTS-ODF-FXH24 Fiber Optic Wall Mount Patch Panel is currently being widely used for distributing outdoor optical cable in indoor conditions. It is very suitable for FTTx uses. This cabinet offers ideal environment for fibers to be spliced and well organized under outdoor environment. The cabinet has functions of cable termination, splicing, distribution and cross-connection. Solid and fully-closed
Sur commandeIt is made of cold-roll steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. And it has metal sliding fittings with self-locking functions prevent the drawer from falling when moved.
Sur commandeIt converts Ethernet frame structure to E1 frame structure, and recovers E1 frame structure to Ethernet frame structure at the other side, which enables Ethernet data to transmit in telecom network based on E1. Because it is efficiently and effectively used the spared bandwidth of telecom providers, it saves the networking cost and improve the efficiency and can be used immediately. The outstandin
Sur commandeThe E1 to Ethernet protocol Converter is a device that extends Ethernet by means of telecommunication lines (E1 or E1 transport network, such as PDH, SDH, or microwave, etc.) and is also referred to “Net Bridge". It can effectively utilize free bandwidth of telecom operators’ lines and can be used instantly once it is deployed, with little increased investment. Power : 220V±20% , -36 ~ -72V Power
Sur commandeBDCOM TS-1GP4G-POE Series is a new generation smart ONT for integrated multi-service broadband access networks. TS-1GP4G-POE supports common enterprise broadband access service, POE service and outdoor wide-temperature. TS-1GP4G-POE is complied with the international standard ITU-T G.984/988 and PRC Communication Industry Standard GPON ONT in Access Technology Requirements and China Telecom GPON T