
Réf. MODELNUMBERTS-E1-232-422-485
Overview: This interface converter is based on FPGA, providing 1Channel RS232/485/422 transmission on E1 interface. The product breaks through contradictions between traditional serial interface communication distance and communication rate, besides, it also can solve electromagnetic interference, ground ring interference and lightning damage. The device greatly improves reliability, security and
Caractéristiques techniques
Prix communiqué par notre équipe selon vos besoins
Produits complémentaires et accessoires
Sur commandeProduct Description Overview: This series adopts industrial-grade design, large-scale FPGA design, provides 1 serial port, and each port supports RS232/422/485 three business interfaces at the same time. The device is the best choice for connecting the remote terminal unit (RTU) to the host computer (HOST) or distributed data acquisition system (SCADA) controller, with high performance-price ratio
Sur commandeTSM-4E1/ETH Converter is based on FPGA, providing 4 unframed E1 interfaces and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial
Sur commandeTS-4RS485-1ETH provides 4 ports RS485 (RS485 connector: RJ45), 1 port 10/100Base-Tx Ethernet (and optional: 1port fiber port (SFP or 1*9)). Its provide strong function configuration tools based in Windows platform, and can guide user configure the device step by step. All configurations are coming true by WEB or Telnet, support cross-gateway and cross-router, user can change configure IP address,
Sur commandeTechnical Specification: HD TVI/CVI/AHD/CVBS 4 in 1 Video to Fiber Converter can simultaneously transmit 4channels HD TVI/CVI/AHD/CVBS video over one single-mode optical fiber. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for differ
Sur commandeThe E1 to Ethernet protocol Converter is a device that extends Ethernet by means of telecommunication lines (E1 or E1 transport network, such as PDH, SDH, or microwave, etc.) and is also referred to “Net Bridge". It can effectively utilize free bandwidth of telecom operators’ lines and can be used instantly once it is deployed, with little increased investment. Power : 220V±20% , -36 ~ -72V Power
Sur commandeProduit sur Commande Overview: DATASHEET (PDF) This device provides 32Channel telephone 1-4Channel E1 interface, 4Channel 1000M Ethernet interface (Wire speed 1000M) and 4 expansion interface. 4Channel Ethernet interface is switch interface, can support VLAN. Option: 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data, it is very flexible.
Sur commandeTSM-32EN+ISO: This device provides 32Channel telephone 1-4Channel E1 interface, 4 channel physically isolated Fast Ethernet interface (independent bandwidth per line speed 100M), and 4 expansion interface. 4Channel Ethernet interface is switch interface, can support VLAN. 4 expansion interface can be used as the transmission channel of RS232/RS485/RS422 asynchronous data(optional), voice signal, 2
Sur commandeModel: TSM-4PCM: 4*POTS+ 1 *FE SFP single Fiber Mux (Desktop Type) The Equipment supports 1-4*100M Ethernet +4*Voice in the same core Optical fiber transmission is widely used in a variety of industrial control card instrumentation and other occasions not only save fiber resources but also save fiber equipment reduce the point of failure to facilitate the maintenance of equipment. 1-4*100M Etherne